Factory Settings - NETGEAR WAC104 User Manual

Factory Settings

You can reset the access point to the factory default settings, which are shown in the following table.
For more information about resetting the access point to its factory settings, see
to Its Factory Default Settings
Table 2. WAC104 access point factory default settings
Feature
Access point login
User login URL
User name (case-sensitive)
Login password
(case-sensitive)
IP settings
DHCP client
VPN pass-through
WiFi network
WiFi communication
SSID names
Security
Country/region
RF channel
WiFi operating mode
SSID broadcast
802.11ac Wireless Access
on page 44.
Default Setting
192.168.0.100
admin, nonconfigurable
password
Disabled
Note The access point functions as a bridge between its WiFi
and LAN clients and the router in your network. The
access point does not provide routing services such as
NAT and a DHCP server.
Enabled, nonconfigurable
Enabled
See product label
None (open WiFi network)
• North America: United States
• Europe: Europe
• Other continents: Varies by region
Auto. The available channels depend on the region.
• Up to 300 Mbps at 2.4 GHz
• Up to 867 Mbps at 5 GHz
Enabled
Factory Default Settings and Technical Specifications
76
Return the Access Point