NETGEAR WAC104 User Manual page 50

The user name is admin. The default password is password. The user name and password are
case-sensitive.
The information onscreen uses the following color coding:
•
A green flag indicates that the AP information and IP settings are fine and no problems exist. For
a WiFi network, the network is enabled and secured.
•
A red X indicates that a problem exists or the connection is down. For a WiFi network, the network
is disabled or down.
•
An amber exclamation mark
(for example, because a cable is disconnected), that a WiFi network is enabled but open (that is, it
is unprotected), or that another situation that requires your attention occurred.
Note By default, the access point's WiFi network in the 2.4 GHz and 5 GHz bands is
open and unsecured. We recommend that you set up WiFi security for both radio
bands.
The following table describes the fields of the four panes on the Home page.
Field
AP Information
AP Name
Ethernet MAC Address
Manage the Access Point and Monitor the Traffic
802.11ac Wireless Access
indicates that the access point cannot get an Internet connection
Description
The access point name. By default, the name is WAC104. For more information,
see Manage the Basic WiFi Settings and WiFi Security of the WiFi Network
page 27.
The Media Access Control (MAC) address of Ethernet (LAN) interface through
which the access point connects to the router or network switch or hub. This
address does not change.
50
on