Manage Advanced Wifi Settings - NETGEAR WAC104 User Manual

Manage Advanced WiFi Settings

For most WiFi networks, the advanced WiFi settings work fine and you do not need to change the settings.
To manage advanced WiFi features:
1. Open a web browser from a computer that is connected to the same network as the access point or to
the access point directly through an Ethernet cable or WiFi connection.
2. Enter the IP address that is assigned to the access point.
If you did not enable the DHCP client on the access point or did not assign a static IP address, enter
the default access point IP address 192.168.0.100.
A login window opens.
3. Enter the access point user name and password.
The user name is admin. The default password is password. The user name and password are
case-sensitive.
The Home page displays.
4. Select Advanced Setup > Advanced Wireless Settings.
5.
Enter the settings as described in the following table.
The descriptions in the table (not the settings onscreen) apply to both the Advanced Wireless Settings
(2.4GHz b/g/n) section and the Advanced Wireless Settings (5GHz 802.11a/n/ac) section.
802.11ac Wireless Access
Manage the Advanced WiFi Features
62