NETGEAR WAC104 User Manual page 36

5. In the Security Options section below either the Wireless Network (2.4GHz b/g/n) section or the Wireless
Network (5GHz a/n/ac) section, select the WPA/WPA2 Enterprise radio button.
6. In the WPA/WPA2 Enterprise section, enter the settings as described in the following table.
Field
Encryption mode
Group Key Update Interval
RADIUS Server IP Address
RADIUS Server Port
Shared Key
7. Click the Apply button.
Your settings are saved.
8. Make sure that you can reconnect over WiFi to the network with its new security settings.
If you cannot connect over WiFi, check the following:
• If your WiFi-enabled computer or mobile device is already connected to another WiFi network in your
area, disconnect it from that WiFi network and connect it to the WiFi network that the access point
provides. Some WiFi devices automatically connect to the first open network without WiFi security
that they discover.
• If your WiFi-enabled computer or mobile device is trying to connect to your network with its old
settings (before you changed the settings), update the WiFi network selection in your WiFi-enabled
computer or mobile device to match the current settings for your network.
802.11ac Wireless Access
Description
From the Encryption Mode menu, select the enterprise mode:
• WPA [TKIP] +WPA2 [AES]. This type of security enables WiFi devices
that support either WPA or WPA2 to join the access point's WiFi network.
This is the default mode.
• WPA2 [AES]. WPA2 provides a secure connection but some older WiFi
devices do not detect WPA2 and support only WPA. If your network
includes such older devices, select WPA [TKIP] + WPA2 [AES] security.
Enter the interval in seconds after which the RADIUS group key is updated.
The default interval is 3600 seconds.
Enter the IPv4 address of the RADIUS server to which the WiFi network can
connect.
Enter the number of the port on the access point that is used to access the
RADIUS server for authentication. The default port number is 1812.
Enter the shared key (RADIUS password) that is used between the access
point and the RADIUS server during authentication of a WiFi user.
Manage the Basic WiFi Network Settings
36