NETGEAR WAC104 User Manual page 10

Install and Access the Access Point in
Your Network
This chapter describes how you can install and access the access point in your network.
The chapter contains the following sections:
• Position Your Access Point
• Connect the Access Point to Your Router or Network
• Log In to the Access Point After Setup to View or Change Settings
• Change the Language
• Change the admin Password
• Set Up Password Recovery
• Set the Time Zone and Adjust the Daylight Saving Time
• Connect to the Access Point's Network After Installation
on page 11
on page 20
on page 21
on page 21
on page 12
on page 19
on page 22
on page 23
10
2