NETGEAR WAC104 User Manual page 28

4. Select Setup > Wireless Setup.
5. View or change the basic WiFi settings and security settings.
The following table describes the fields on the Wireless Network page.
Field Description
AP Name The name of the access point. By default, the name is WAC104.
Region From the menu, select the region in which the access point operates. For some countries. you
cannot change the region because it is preset.
Wireless Network (2.4GHz b/g/n)
Name (SSID) The SSID is the WiFi network name. If you did not change the SSID, the default SSID for the
2.4 GHz band displays. The default SSID is also printed on the product label (see
Label
802.11ac Wireless Access
Note It might not be legal to operate the access point in a region other than the
regions listed in the menu. If your country or region is not listed, check with
your local government agency.
on page 9).
Note If you change the SSID, enter a 32-character (maximum), case-sensitive
name in this field.
Manage the Basic WiFi Network Settings
28
Product