Omron CV500 Installation Manual page 57

Assembly
Expansion Data Memory Unit
Mounting the Expansion
Data Memory Unit
1, 2, 3...
Caution
!
44
Mount the Expansion Data Memory Unit to the CV1000 CPU using the following
procedure.
1. Turn OFF the power to the PC.
Do not attempt to mount or remove the Memory Unit while the power to the PC is
ON. During mounting or removal, exercise care that you do not directly touch the
memory elements or connector pins of the Unit. Hold the Unit by the lever.
2. Remove the Expansion Data Memory Unit cover on the front panel of the
CPU by pushing the lever on the cover upwards, as indicated by the arrow
on the cover.
Bracket screw
Bracket
3. Loosen the bracket screw and remove the bracket.
Expansion Data Memory Unit
Pullout lever
PCB guides
4. Hold the Expansion Data Memory Unit with the component side to the right,
and insert the Unit into the PCB guides. In doing so, a slight resistance will
be felt as the connector on the Memory Unit mates with the connector on the
CPU. Continue pushing until the Memory Unit is inserted completely into the
CPU.
Section 3-1