Omron CV500 Installation Manual page 120

Power Supply Units
Item
Supply voltage 100 to 120 or 200 to 240 VAC, 50/60 Hz
Operating voltage 85 to 132 or 170 to 264 VAC
range
Power 150 VA max.
consumption
Inrush current 30 A max.
Output capacity 8 A, 5 VDC
Insulation
20 M
resistance
Dielectric
2,300 VAC 50/60 Hz for 1 min between AC external and
strength
leakage current: 10 mA max.
1,000 VAC 50/60 Hz for 1 min between DC external and
leakage current: 20 mA max. (See note 1.)
Noise immunity 1,000 Vp-p, pulse width: 100 ns to 1 s, rise time: 1 ns (via noise simulation)
Vibration 10 to 58 Hz, 0.075-mm amplitude, 58 to 150 Hz, acceleration: 9.8 m/s
resistance directions for 80 minutes (Time coefficient; 8 minutes x coefficient factor 10 = total time 80 minutes)
(according to JIS C0040)
Shock resistance 147 m/s
Ambient Operating: 0 to 55 C
temperature Storage: –20 to 75 C (except Memory Card and battery)
Humidity 10% to 90% (with no condensation)
Atmosphere Must be free from corrosive gasses
Grounding Less than 100
Enclosure Mounted in a panel
Weight All models are each 9 kilograms max.
Dimensions CPU (10 slots)/Expansion CPU/Expansion I/O (11 slots): 480 x 250 x 123 mm (WxHxD)
(without cables, CPU (5 slots)/Expansion I/O (6 slots): 306 x 250 x 123 mm (WxHxD)
see note 3) CPU (3 slots)/Expansion I/O (4 slots): 236 x 250 x 123 mm (WxHxD)
Note 1. Disconnect the
insulation and dielectric strength tests. If the tests are repeatedly performed with the
terminals short-circuited, the internal components may be damaged.
2. Acceleration (G)
3.
H
Appendix B
Specifications
CVM1-PA208
min. (at 500 VDC) between AC external terminals and
2
3 times each in X, Y, and Z directions (according to JIS C0041)
(LG) terminal of the Power Supply Unit from the
Amplitude:
0.075 mm
Frequency (Hz)
W
CV500-PS221
200 VA max.
12 A, 5 VDC
(GR) terminals,
(GR) terminals,
CV500-PS211
24 VDC
20.4 to 28.8 VDC
100 W max.
30 A max.
12 A, 5 VDC
(GR) terminals. (See note 1.)
2
(see note 2) in X, Y, and Z
(GR) terminal when performing
(LG) and
D
(GR)
107