Omron C200HX-CPU ZE Series Operation Manual
Hide thumbs
Also See for C200HX-CPU ZE Series:
- Replacement manual (38 pages) ,
- Installation manual (253 pages) ,
- Instruction manual (261 pages)
Related Manuals for Omron C200HX-CPU ZE Series
Summary of Contents for Omron C200HX-CPU ZE Series
- Page 1 Cat. No. W322-E1-04 Programmable Controllers C200HX-CPUjj-ZE C200HG-CPUjj-ZE C200HE-CPUjj-ZE...
- Page 2 C200HX-CPUjj-ZE C200HG-CPUjj-ZE C200HE-CPUjj-ZE Programmable Controllers Operation Manual Revised May 2003...
- Page 4 OMRON. No patent liability is assumed with respect to the use of the information contained herein. Moreover, because OMRON is constantly striving to improve its high-quality products, the information contained in this manual is subject to change without notice.
-
Page 6: Table Of Contents
............OMRON Product Terminology . - Page 7 TABLE OF CONTENTS Controlling Bit Status ........... . . Work Bits (Internal Relays) .
- Page 8 TABLE OF CONTENTS SECTION 8 Serial Communications ......Introduction ............Host Link Communications .
- Page 9 It also provides an overview of the process of programming and operating a PC and ex- plains basic terminology used with OMRON PCs. Descriptions of Peripheral Devices used with the C200HX/HG/HE PCs and a table of other manuals available to use with this manual for special PC appli- cations are also provided.
- Page 10 PRECAUTIONS This section provides general precautions for using the Programmable Controller (PC) and related devices. The information contained in this section is important for the safe and reliable application of the PC. You must read this section and understand the information contained before attempting to set up or operate a PC system. 1 Intended Audience .
-
Page 11: Intended Audience
It is extremely important that a PC and all PC Units be used for the specified purpose and under the specified conditions, especially in applications that can directly or indirectly affect human life. You must consult with your OMRON representative before applying a PC System to the above mentioned applications. -
Page 12: Operating Environment Precautions
Application Precautions such problems, external safety measures must be provided to ensure safety in the system. • When the 24-VDC output (service power supply to the PC) is overloaded or short-circuited, the voltage may drop and result in the outputs being turned OFF. - Page 13 Application Precautions • Connecting or disconnecting any cables or wiring. Caution Failure to abide by the following precautions could lead to faulty operation of the PC or the system or could damage the PC or PC Units. Always heed these pre- cautions.
-
Page 14: Conformance To Ec Directives
Conformance to EC Directives Conformance to EC Directives Observe the following precautions when installing the C200HX/HG/HE PCs that conform to the EC Directives. Provide reinforced insulation or double insulation for the DC power source con- nected to the DC I/O Unit and for the Power Supply Unit. Use a separate power source for the DC I/O Unit from the external power supply for the Relay Output Unit. -
Page 15: Introduction
It also provides an overview of the process of programming and operating a PC and explains basic terminology used with OMRON PCs. Descriptions of Programming Devices used with the C200HX/HG/HE PCs, a table of other manuals available to use with this manual for special PC applications, and a description of the new features of the C200HX/HG/HE PCs are also provided. -
Page 16: Overview
The terminology used throughout this manual is somewhat different from relay terminology, but the concepts are the same. The following table shows the relationship between relay terms and the PC terms used for OMRON PCs. Relay term PC equivalent contact... -
Page 17: Pc Terminology
Section PC Terminology Actually there is not a total equivalence between these terms. The term condi- tion is only used to describe ladder diagram programs in general and is specifi- cally equivalent to one of a certain set of basic instructions. The terms input and output are not used in programming per se, except in reference to I/O bits that are assigned to input and output signals coming into and leaving the PC. -
Page 18: Omron Product Terminology
Appendix A Standard Models list products according to these groups. The term Unit is used to refer to all of the OMRON PC products. Although a Unit is any one of the building blocks that goes together to form a C200HX/HG/HE PC, its meaning is generally, but not always, limited in context to refer to the Units that are mounted to a Rack. -
Page 19: Programming Devices
PC program or to interface the PC to external devices to output the program or memory area data. Model numbers for all devices listed below are provided in Appendix A Standard Models. OMRON product names have been placed in bold when introduced in the following descriptions. -
Page 20: Available Manuals
Section Available Manuals cation quick and easy. Syntax checks may also be performed on the programs before they are downloaded to the PC. The SYSMAC-CPT Support Software does not support any of the original C200HX/HG/HE CPU Units at present. Available Manuals The following table lists other manuals that may be required to program and/or operate the C200HX/HG/HE PCs.