Omron CV500 Installation Manual page 34

System Configuration
Mounting Locations
Unit CPU
Rack
16-/32-/64-point Yes
I/O Units
Service Power Yes
Supplies
Interrupt Input Yes
Units
C500 Special I/O Yes
Units
BASIC Units Yes
Temperature Yes
Controller Data
Link Unit
Personal Yes
Computer Units
SYSMAC NET Yes
Link Units
SYSMAC LINK Yes
Units
SYSMAC BUS/2 Yes
Remote I/O
Master Units
Ethernet Units Yes
CompoBus/D Yes
Master Unit
SYSMAC BUS Yes
Remote I/O
Master Units
SYSMAC BUS Yes
I/O Link Units
The following table below summarizes the Units that can be mounted to CPU,
Expansion CPU, Expansion I/O, and Slave Racks. For detailed information
about the Units listed below, refer to the operation manual for the individual Unit.
Expansion Expansion
CPU Rack I/O Racks
Yes Yes
Yes Yes
Yes No
Yes Yes
Yes No
Yes No
Yes No
Yes No
Yes No
Yes No
Yes No
Yes No
Yes Yes
Yes Yes
Slave Racks (CV- or
C-series)
Yes
Yes
No
Yes
The following cannot be
mounted to SYSMAC
BUS/2 Slave Racks:
NC103, NC221, NC222,
CP131, FZ001, PID01,
and MCC01.
The following cannot be
mounted to SYSMAC
BUS Slave Racks:
NC221, NC222, CT041,
and FZ001.
All other Special I/O Units
can be mounted.
No
No
No
No
No
No
No
No
No
No
Section 2-1
Remarks
---
---
Up to 4 Units can be mounted.
When mounting to the Expansion
CPU Rack, set the rack number
to 1.
Up to 8 of the following Units can
be mounted: Analog Input, Analog
Output, High-speed Counter, PID,
Position Control, Magnetic Card,
ASCII, ID Sensor, and Ladder
Program I/O. Position Control
Units, NC103-E, and PID Units
use 2 slots.
READ(190)/WRIT(191) cannot be
used with Units mounted to
SYSMAC BUS Slave Racks.
Up to 16 CPU Bus Units can be
used with each PC, including 2 d i h h PC i l di
Remote I/O Master Units for the
CV500 or CVM1-CPU01-EV2 or 4
for the CV1000, CV2000, for the CV1000 CV2000
CVM1-CPU11-EV2, or
CVM1-CPU21-EV2, u to a 4 CVM1-CPU21-EV2, up to a 4
each of the SYSMAC NET Link,
SYSMAC LINK Units, Host Link ,
U it Unit, or Ethernet Unit, and 1 Eth t U it d 1
CompoBus/D Master Unit.
A Personal Computer Unit A P l C t U it
requires 4 slots.
Up to 4 Units can be mounted to
a CV500 or CVM1-CPU01-EV2
and eight Units to a CV1000,
CV2000, CVM1-CPU11-EV2, or
CVM1-CPU21-EV2.
I/O cannot be set to 16 input/16
output.
2
21