Intelligent Hub Mounting; Intelligent Hub Hub-3000 - Furuno VR-7000 Installation Manual

1. MOUNTING
1.9

Intelligent HUB HUB-3000

Use the optional Intelligent Hub HUB-3000 to connect gateway network equipment.
This network cannot be connected with the LAN network on board. Also, to connect
with the non-FURUNO system or multiple Live Player V5 (PCs) use this unit.
Mounting considerations
Select a mounting location, keeping in mind the following points:
• Locate the unit away from heat sources.
• Select a location where the shock and vibration are minimal.
• Locate the unit away from places subject to water splash and rain.
• Make the maintenance space shown in the outline drawing for maintenance and
checking purpose.
• A magnetic compass will be affected if the unit is placed too close to the magnetic
compass. Observe the compass safe distances at the front of this manual to prevent
interference to a magnetic compass.
• Select a mounting location considering the length of the cables to be connected to
this unit.
Mounting
1. Use two binding screws (M3x6, supplied) to attach the cable clamp (supplied) to
the bottom of the HUB-3000.
2. Fasten four self-tapping screws (4x20, supplied) to fix the unit.
1-24
Binding screw
(M3x6, 2 pcs)
Cable clamp
HUB-3000, bottom view
: Screw holes