Hydrostatic Release Unit - Furuno VR-7000 Installation Manual

Example: When the expiration date is April 2019.
The expiration date is indicated on this sticker.

• Hydrostatic release unit

The expiration date of the hydrostatic release unit is indicated on the sticker at-
tached to the side of the unit or the sticker on the side of the bracket. For the sticker
attached to the side of the unit, the numbers on the sticker are cut out or filled with
a permanent marker according to the expiration date. For example, when the expi-
ration date is June 2016, the numbers below the "2016" and "JUN" on the sticker
are cut out or filled with a permanent marker.
Example: When the expiration date is June 2016.
The number below "2016" is cut out or
filled with a permanent marker.
For the sticker attached to the side of the bracket, the expiration date is recorded in
the field shown below.
After confirming the expiration date, record it to the table in section 3.2.
Note: If the expiration date is not recorded on the sticker, record it on the sticker,
referring to the sticker attached to the side of the hydrostatic released unit.
"2019" is cut out or filled
with a permanent marker.
"4" is cut out or filled with
a permanent marker.
The number below "JUN" is cut out or
filled with a permanent marker.
The expiration date is inscribed here.
1. MOUNTING
1-9