Video Lan Converter If-7100 - Furuno VR-7000 Installation Manual

2. WIRING
2.7

Video LAN Converter IF-7100

The video LAN converter converts the radar/ECDIS video signal (DVI-D or RGB) to a
LAN signal. Use the optional cable shown below to input the DVI-D or RGB signal.
• DVI-D:
• RGB:
Ground terminal
To ship's ground
terminal
The video LAN converter has two input channels for DVI-D and two input channels for
RGB*. The combinations of input channels shown below are available. Set the input
channels for the video LAN converter, using the Maintenance Viewer program. For
how to set, see the operator's manual of the Maintenance Viewer (OME-44852).
• DVI1 and DVI2
• RGB1* and DVI2
*: The RGB1 and RGB2 ports are available when the serial number (SER.NO.) of the
video LAN converter is "200001" or after. If you need to input the RGB signal to the
unit whose serial number (SER.NO.) is before "200001", use the RGB-DVI converter
(maker: IMAGENECS, model: RS-1530A) to convert to the DVI-D signal.
Note 1: Do not connect/disconnect the DVI-D or RGB connectors while the turning the
power on.
Note 2: Turn on or off the IF-7100 and connected equipment (radar or ECDIS proces-
sor unit) in the order shown below.
• Turning the power on: Tun on the IF-7100 before the connected equipment.
• Turning the power off: Turn off the connected equipment before the IF-7100.
Note 3: The IF-7100 does not have a power switch. Turn off the IF-7100 from the main
switchboard.
Note 4: The IF-7100 can detect and adjust the DVI-D signal automatically. However,
the RGB signal must be manually adjusted, using the Maintenance Viewer program.
For how to adjust, see the operator's manual of the Maintenance Viewer (OME-
44852).
Note 5: When you use the IF-7100 that is compatible with RGB signal input, update
the programs shown below to version 1.04 or after.
• VDR System Program
• Live Player V5
• Maintenance Viewer
2-18
DVI-D/D S-LINK 5M/10M
BNCX5-DSUB15-L400 and CP24-01200/01210 (see section 2.7.2), or
3COX-2P-6C 5M/10M
Power cable entrance
RGB1 port*
To Radar/ECDIS display 1
RGB2 port*
To Radar/ECDIS display 2
DVI2 port
To Radar/ECDIS display 2
DVI1 port
To Radar/ECDIS display 1
• DVI1 and RGB2*
• RGB1* and RGB2*
Network port
To the DCU