Junction Box If-8530; Location Of Connectors - Furuno VR-7000 Installation Manual

2.11 Junction Box IF-8530 (Option)
When the junction box IF-8530 is connected to the VDR, update the program version
of the junction box to ver. 2450113-01.01 or later. To update the program, prepare the
items shown in the table below.
Update program
Cable between a PC and
junction box
Manual for how to update
the program
The items above and IF-8530 is included in the optional IF-8530 version up kit (OP24-
48).
2.11.1

Location of connectors

Connect the serial, analog and digital signals to the terminal boards or connectors in
the junction box. Use the 2.5 mm
For serial and analog signal input, the DIP switch setting is required (see
section 2.11.2).
DCU
CH1: No use.
Digital
Channels
Item
Download it from Furuno Technet.
Type: JEC9-XH4-#26-L2500, Code No.: 000-170-945-10
Type: C42-01406-*, Code No.: 000-190-046-1*
Location of connectors
Serial channels
CH3 CH4 CH5 CH6
CH1
Description
2
or AWG14 wires to connect the signals.
CH7 CH8 CH1 CH2
DC 24V IN
2. WIRING
DIP switch (from left):
S5 (Keep the default)
S4 (Baud rate 1)
S3 (Baud rate 2)
S2 (Analog 1)
S1 (Analog 1)
Analog
channels
2-41