Panasonic KX-TVM50 Programming Manual page 95

Allows you to specify an operation that is enabled for all other times not included in the set time
periods.
Value Range
<Period 1–5>
Name: Max. 16 characters
Time: HH:MM (HH: Hour, MM: Minute)
Operation: Tr to Mbx, Tr to Ext, Operator, Tr to Out, Exit, Prev Menu, CS, VM Serv, Call Tr Serv,
Subscriber Serv, Dial by Name, Repeat Menu, Main Menu, Fax Tr, List All Names, None (see "Keypad
Assignment 0–9, *, #")
<Outside>
Name: Max. 16 characters
Operation: Tr to Mbx, Tr to Ext, Operator, Tr to Out, Exit, Prev Menu, CS, VM Serv, Call Tr Serv,
Subscriber Serv, Dial by Name, Repeat Menu, Main Menu, Fax Tr, List All Names, None (see "Keypad
Assignment 0–9, *, #")
Feature Manual References
2.2.16 Custom Service
Day Control
This service allows you to assign a different operation for each day of the week, and for all holidays.
The caller makes no selection and no menu is announced.
Description
The information typed in this field is for reference only.
Value Range
Max. 32 characters
Feature Manual References
2.2.16 Custom Service
Monday–Sunday, and Holiday
Specifies a service for each day of the week and for all holidays.
Note
• If an operation is assigned to "Holiday" here, either one of the following settings is required
in order to activate the operation for "Holiday" Custom Service:
a.
In "Service Settings"→ "Holiday Settings"→ the desired "Holiday Service"→ "Service",
select "Custom" and specify the number of this Date Control-"Holiday" Custom Service, or
the number of its higher layered Custom Service.
b.
Assign the desired Date Control-"Holiday" Custom Service or its higher layered Custom
Service to the desired Port/Trunk (see 2.3.1 Service Group).
In "Service Settings"→ "Holiday Settings"→ the desired "Holiday Service"→ "Port/Trunk
Affected", exclude the Port/Trunk numbers that are assigned to the Date Control-"Holiday"
Custom Service or the number of its higher layered Custom Service.
2.4 Service Settings
Programming Manual 95