Panasonic KX-TVM50 Programming Manual page 72

2.3 Port/Trunk Service
2.2.39 Port Service
2.2.46 Trunk Service (Universal Port) (APT/DPT Integration Only)
3.1.6 Changing the Company Greeting and Incoming Call Service Setting
Incoming Call Service Prompt
Specifies the language of system prompts used by this call service. If set to "Primary", the default
language which is selected from all installed languages will be used. When set to "Selective", the
caller can select the language of his or her choice, provided the System Administrator or the Message
Manager has recorded the Multilingual Selection Menu. To specify Prompt Selection Number, see
"Prompt Setting" in 2.5.4 Parameters.
Note
• If "Selective" is specified, you will need to select a prompt available for rotary callers. See
"Prompt for Rotary Callers" below.
Value Range
Primary, Selective, Guidance No. (KX-TVM50: No. 1-3, KX-TVM200/KX-NCV200: 1-10)
Programming Manual References
"Prompt Setting" in 2.5 System Parameters
Feature Manual References
2.2.44 System Prompts
Prompt for Rotary Callers
Specifies which language a rotary caller or an External Delivery Message receiver hears when he or
she cannot enter any digits (Prompt Selection Number) after the Multilingual Selection Menu has
been played. If set to "Primary", the default language which is selected from all installed languages
will be used.
Note
• "Prompt for Rotary Callers" is only available when "Incoming Call Service Prompt" is set to
"Selective".
Value Range
Primary, Selective, Guidance No. (KX-TVM50: No. 1-3, KX-TVM200/KX-NCV200: No. 1-10)
Feature Manual References
2.2.44 System Prompts
Delayed Answer Time
Specifies whether the port or trunk answers immediately (0) or with delay (1 s – 60 s).
Value Range
0 s–60 s
72 Programming Manual