Panasonic KX-TVM50 Programming Manual page 62

2.2 Class of Service
Note
• The Intercom Paging feature is only available when the VPS is connected to a Panasonic
KX-T series PBX using APT/DPT Integration.
• "Intercom paging Parameters" can be edited by clicking Edit System Parameters/
Parameters/Intercom Paging Parameters at the bottom of COS Parameters window.
Value Range
1–32, All
Feature Manual References
2.2.25 Intercom Paging (APT/DPT Integration Only)
Prompt Mode
Specifies the language used for system prompts played for the subscriber during Subscriber Service.
If set to "Primary", the default language which is selected from all installed languages will be used.
Note
• If a certain prompt is not recorded in the language selected by the subscriber, the English
version of that prompt will be used.
Value Range
Primary, Guidance No. (KX-TVM50: No. 1-3, KX-TVM200/KX-NCV200: No. 1-10)
Feature Manual References
2.2.33 Multilingual Service
2.2.44 System Prompts
Number of CIDs for Caller Name Announcement
Specifies the maximum number of Caller IDs which subscribers can assign for the Personal Caller
Name Announcement.
Value Range
None, 1–30
Feature Manual References
2.2.10 Caller Name Announcement—Personal (APT/DPT Integration Only)
Subscriber's Manual References
5.11 Personal Caller Name Announcement
Message Envelope Setting
Specifies when message envelopes (message date and time, name of the person who recorded or
transferred the message, telephone number of the caller) are announced.
Note
• If you want to skip this information, press [6] while listening to it.
62 Programming Manual