Value Range
Before: The VPS announces Message Envelope before playing the recorded message.
After: The VPS announces Message Envelope after playing the recorded message.
Require: The VPS announces Message Envelope when it is required by DTMF command.
Number of New Messages Announcement
Specifies the position of the Number of New Messages Announcement.
Value Range
None: Not announced
Subscriber Service: The VPS announces the number of new messages at the beginning of
Subscriber Service (i.e., after the subscriber has logged in to his or her mailbox).
Receiving Messages: The VPS announces the number of new messages after the subscrier has
selected to listen to messages while accessing his or her mailbox.
Total Number of Message Announcement
Specifies the position of the Total Number of Messages Announcement.
Note
•
When the same position is set for the Number of New Messages Announcement and the
Total Number of Message Announcement, the VPS announces the number of new
messages then the total number of messages.
Value Range
None: Not announced
Subscriber Service: The VPS announces the number of new messages at the beginning of
Subscriber Service.
Receiving Messages: The VPS announces the number of new messages at the beginning of
Receive Message Service.
Mailbox Capacity Warning
Specifies if and when the VPS alerts subscribers when recording time for their mailboxes is running
low. If set to "None", the warning will not be announced. All other settings indicate the remaining
recording time capacity threshold for when the announcement is heard.
Value Range
None, 1–60 min
Feature Manual References
2.3.17 Mailbox Capacity Warning
Subscriber's Manual References
5.21 Mailbox Capacity Warning
2.2 Class of Service
Programming Manual
63