Panasonic KX-TVM50 Programming Manual page 108

2.5 System Parameters
Daylight Saving Time
Specifies whether to use daylight saving time. If "Enter Time Frame" is selected, both the starting date
and ending date must be set. The same date cannot be used for both settings. The clock adjusts itself
from 2 am to 3 am on the starting date, and adjusts itself from 2 am to 1 am on the ending date.
WARNING
If the VPS clock is synchronised with the PBX clock (see "2.4.10 Time
Synchronisation (DPT Integration Only)" in the Feature Manual), the daylight
saving time setting of the VPS is not used. Adjust the PBX for daylight saving time
as necessary.
Note
• The VPS changes to and from DST at 2:00 AM. In most of the United States, DST begins
at 2:00 AM on the first Sunday in April and ends at 2:00 AM on the last Sunday in October.
Value Range
None
Enter Time Frame (Start Date, End Date): MM/DD (MM: Month, DD: Day)
Feature Manual References
2.2.17 Daylight Saving Time Assignment
Prompt Setting
This setting is required when Multilingual Service is enabled.
Primary Language
Specifies the default language to be used when another language is not selected in the Multilingual
Selection Menu.
Value Range
Guidance No. (KX-TVM50: No. 1-3, KX-TVM200/KX-NCV200: No. 1-10)
Feature Manual References
2.2.33 Multilingual Service
2.2.44 System Prompts
Language 1–5 (KX-TVM200/KX-NCV200), 1–3 (KX-TVM50)
Assign a selection number (1–9) to each language. Callers use the numbers to select the desired
languages for their message prompts. This setting is required when either one or both of the following
parameters are set to "Selective":
a)
"Prompt Mode" in 2.1.5 External Message Delivery
b)
"Incoming Call Service Prompt", "Prompt for Rotary Callers" in 2.3.1 Service Group
Language
Specifies a language.
108 Programming Manual