Panasonic KX-TVM50 Programming Manual page 47

Value Range
0 min–120 min (E/NE/Singapore/Malaysia: 2 min–120 min, C: 60 min–120 min)
Feature Manual References
2.2.31 Message Waiting Notification—Device
Use Mode
Specifies if and how each device is used for message notification. The subscriber can also specify
the use mode from his or her telephone.
Value Range
Not Use: The selected device is not used for message notification.
Continuously: The device is called whenever a message is recorded in the mailbox. If "Notification
Type" is set to "Only Urgent Messages" , the device is called whenever an urgent message is
recorded in the mailbox.
Scheduled: The selected device is called only during the selected times.
Feature Manual References
2.2.31 Message Waiting Notification—Device
Time Frame 1, 2 (MON–SUN)
Specifies the schedule (time frame) of Message Waiting Notification by the selected device for each
day of the week when "Scheduled" is set in "Use Mode". Notification will be sent for messages
received during the time frame set here. For messages received during times outside of the time
frame, notification will be sent at the beginning of the next time frame.
Follow the steps below to edit Time Frame:
1.
Click a day (Sunday – Saturday) tab.
2.
Click "Time Frame 1" or "Time Frame 2".
3.
Enter the start and end times in the "Start At:" and "End At:" fields, or drag the edges of the time
frame to mark the start and end times.
To copy the schedule of one day to another day
1.
Select a time frame in the desired "copy from" day.
2.
Click Copy.
3.
Select a time frame in the desired "copy to" day.
4.
Click Paste.
4.
Click OK.
Value Range
00:00–23:59
Feature Manual References
2.2.31 Message Waiting Notification—Device
Device Notification Timer
Specifies the delay time for Message Waiting Notification per device.
2.1 Mailbox Settings
Programming Manual 47