B0003308 / 1.4 /
13.02.2013
5
Electrical installation
Pos: 22 /Doppelblech/Geräte/R1002/5 Elektrische Installation/Allgemeines @ 0\mod_1185267326656_501.doc @ 4329 @
The system should be installed only by professional electricians. The cables must correspond with
the specifications stated in section „Cables".
The required supply voltage is 24 V DC and should be supplied from the associated machine
controls.
Pos: 23 /Doppelblech/Geräte/R100/5 Elektrische InstallationAnschlussschema I100 @ 0\mod_1185174770078_501.doc @ 4277 @
ROLAND ELECTRONIC GmbH · Otto-Maurer-Str. 17 · DE 75210 Keltern · Phone +49 (0)7236-9392-0 · Fax +49 (0)7236-9392-33
Double Sheet Detector R100 I100
For connecting the cables to the
Note!
control unit, insulated wire-end
ferrules must be used.
Manual
for pairs of sensors
Electrical installation
23