Electrical Installation - Roland R100 Series Manual

B0003306 / Rev. 1.0
5

Electrical installation

Pos: 26 /Doppelblech/Geräte/R100/5 Elektrische Installation/Allgemeines @ 0\mod_1185267326656_501.doc @ 4329
The system should be installed only by professional electricians. The cables must correspond with
the specifications stated in section „Cables".
The required supply voltage is 24 V DC and should be supplied from the associated machine
controls.
Pos: 27 /Doppelblech/Geräte/A100 / I100/5 Elektrische Installation/A100/Anschlussschema A100 @ 0\mod_1185174742796_501.doc @ 4265
ROLAND ELECTRONIC GmbH · Otto-Maurer-Str. 17 · DE 75210 Keltern · Phone +49 (0)7236-9392-0 · Fax +49 (0)7236-9392-33
Double Sheet Detector R100-Serie A100
for single sided sensors
Note! For connecting the cables to the
control unit, insulated wire-end
ferrules must be used.
Manual
Electrical installation
19