Zone Programming - Honeywell OMNI 408 Installation And Setup Manual

OMNI-408/OMNI-408EU Installation and Setup Guide
Question 10, L4
Pager Events
Digit ALARMS TROUBLES
0 NONE
1
2
3
4
5
6
7
8
9
A
B
C
D
E
F

Zone Programming

Questions 11-18 represent all the options related to programmable zones 1-8. Each question contains 4
locations, L1-L4. The first 2 locations (L1 and L2) define the zone type and options. The second 2
locations (L3 and L4) define the alarm code transmitted to the central station for that zone.
Zone Types
You can program zones 1-8 for any one of the zone types in the following table:
7–16
OPEN CLOSE
NOTES:
• Pager alarms are limited to zone
alarms only. Pager troubles are
limited to zone troubles only (fire
trouble, day trouble, 24-hr
trouble).
• The quick command Toggle Pager
([#] [8]) enables /disables the ability
to send pager openings and closings.
The Pager has not been
U L
evaluated by UL and must not
be used for UL installations.
Default = 0