Loading Tabbed Sheets In Lct (C-208) - Minolta CF5001 User Manual

Loading Tabbed Sheets in LCT (C-208)

Rear
Front
Rear
Front
• The tab extension width must be 12.5 mm or less.
• To load the tabbed sheets into LCT, contact your service representative to
1.
Open the LCT top door.
2.
Press the paper loading button to lower the LCT bottom plate.
3.
Load the tabbed sheets into the LCT as illustrated above.
4.
Close the LCT top door.
Example: 3 Tabbed sheets loaded in position for one finished set.
Section 1
Introduction
Printed
side
Example: 9 Tabbed sheets loaded in position for 3 finished sets.
1st TAB
Section 1
Section 1
Printed Introduction
Section 1
Introduction
Introduction
side
position the rear stopper for the paper size to be loaded.
Loading Paper (continued)
1st TAB
Section 1
Introduction
2nd TAB
3rd TAB
ONE FINISHED SET
2nd TAB
1st TAB
2nd TAB
Section 1 Section 1
Introduction Introduction
3rd TAB
3rd TAB
THREE FINISHED SETS
Information
Configuration
1st TAB
Turn On/Off
2nd TAB
3rd TAB
Section 1
Introduction
2-31
2
Machine
Machine
the Power
Loading
Paper