Minolta CF5001 User Manual page 121

Output Mode for Machine with Finisher (continued)
(3) Check the original set direction with the Original direction icon at the upper left corner
of the Basic Screen.
To change the original set direction, touch SPECIAL ORIGINAL on the Basic Screen
to display the Special Original popup menu, touch the desired original set direction
key, then touch OK to return to the Basic Screen.
Proceed to step 6.
5.
Touch OUTPUT APPLI. to display the Output Mode popup menu, then
touch SUB TRAY to highlight it.
To select Face down non-sort mode, deselect both FACE UP and GROUP.
To select Face up non-sort mode, touch FACE UP to highlight it.
To select Face down group mode, touch GROUP to highlight it.
To select Face up group mode, touch FACE UP and GROUP to highlight them.
Touch OK to restore the Basic Screen. OUTPUT APPLI. will be highlighted, and the
output icon of the selected output mode will be displayed in the OUTPUT area.
See p. 3-50 to p. 3-51 for details of the output icons displayed on the Basic
Screen.
6.
Select additional copy conditions, as desired.
7.
Enter the desired print quantity from the control panel keypad.
See p. 12-4 to p. 12-5 to be sure that the finisher capacity is not exceeded.
See p. 3-10 for details on setting print quantity.
3
Copying
Operations
Selecting
Color Mode
Positioning
Originals
Setting Print
Quantity
Set Job During
Warmup
Stop
Scan/Print
Copy Size
Multi-Sheet
Bypass Tray
Lens Mode
1-2, 2-2
2-1
Store Mode
Reserve
Job Status
Screen
Output without
Finisher
FS-115/215
Output Modes
Binding
Mode
3-49