Minolta CF5001 User Manual page 115

Output Mode for Machine without Finisher (continued)
3.
Touch OK on the Output Mode popup menu.
The Basic Screen will be restored with the output icon indicating the Output mode
currently selected.
Touch CANCEL on the Output Mode popup menu to restore the previous
setting.
Touch RECALL STANDARD to restore the initial setting.
See the next page for details of the output icons displayed on the Basic Screen.
4.
Select additional copy conditions, as desired.
5.
Enter the desired print quantity from the control panel keypad.
The exit tray capacity is 120 sheets (28 lb paper). Be sure that the capacity is
not exceeded.
See p. 3-10 for details on setting print quantity.
6.
Position original(s) FACE UP in the document feeder or FACE DOWN on
the platen glass.
See p. 3-4 to p. 3-9 for details on positioning originals.
7.
Press [START].
Press [STOP] to suspend the scanning or printing job. See p. 3-13 for details.
When the paper exit tray capacity is exceeded due to the print
quantity selected, remove the copied sets as they exit; otherwise,
mishandled paper will occur.
3
Copying
Operations
Selecting
Color Mode
Positioning
Originals
Setting Print
Quantity
Set Job During
Warmup
Stop
Scan/Print
Copy Size
Multi-Sheet
Bypass Tray
Lens Mode
1-2, 2-2
2-1
Store Mode
Reserve
Job Status
Screen
Output without
Finisher
FS-115/215
Output Modes
Binding
Mode
3-43