Punching File Holes In Copies (Punch) - Minolta CF5001 User Manual

Punching File Holes in Copies (Punch)

The Punch mode is available only when the PK-5 Punch kit option is installed on the FN-
120/FN-9 finisher.
When the Punch mode is selected in combination with any of the Primary (Main) tray
output modes, each copied sheet is punched and output to the Primary tray according to
the selected output mode.
• Some staple positions previously selected may conflict with this function.
• Special size paper (STD size (special), Non STD size, Wide paper) cannot
• If the ATS (Automatic Tray Switching) functions while the machine uses the
• Do not punch special paper type such as labels, tabbed sheets, etc.
• Be sure that the paper guides of the paper tray are securely aligned to the
Specifications for Punch Mode
❒ Copy paper size: 12"x18", 11"x17", 8.5"x11" (20 lb paper recommended)
❒ Paper weight: 16 lb ~ 34 lb (64 g/m
❒ Number of holes: 3 holes
❒ Hole diameter: 0.315" ± 0.020" (8 mm ± 0.5 mm)
❒ Hole pitch: 4.252" ± 0.020" (108 mm ± 0.5 mm)
❒ Incompatible Conditions: Using platen glass (available when using Platen store mode),
Rotation Sort, Rotation Group, Folding, Stapling & Folding, Three-Folding, Cover
Sheet mode, Output modes using secondary tray, Mixed Original (8.5"x11"R, 5.5"x8.5"
mixed), Copy insertion mode in Chapter, Cover sheet mode in Booklet
be punched.
Punch mode, the punch holes may be slightly off the appropriate positions.
Otherwise, machine trouble may occur in Punching kit.
paper; otherwise the copies may not be punched in position.
4.252"
(108 mm)
2 2
~128 g/m ) paper recommended
Weekly
Timer
Rotation
Vertical/Hori-
zontal Zoom
Folding /
Stapling&Folding
Punch
Three-
Folding
Trimming
Cover Sheet
Feeding
Off-Line
Finishing
8
A dvanced
Information
8-11