Position Originals - Minolta CF5001 User Manual

4.
Touch OK on the Output Mode popup menu.
The Basic Screen will be restored and the selection made in the output mode will be
reflected in the OUTPUT icon area.
5.
Select additional copying features, as required.
6.
Enter the desired print quantity from the control panel keypad.
7.

Position originals.

8.
Press [START].
8-18
Making Trimmed Booklets (Trimming) (continued)
• When copying two-sided signature originals using the Folding or Stapling &
Folding mode, release the automatically selected Booklet mode on the
Application Selection Screen.
• When copying dark originals or using Reverse Image mode together with
Folding or Stapling & Folding mode, the folded line of the output copies may
be slightly shifted.
NO COVER SHEET of Booklet is initially selected.
To change this selection, touch APPLI. on the Basic Screen to display the
Application Selection Screen, then touch Booklet twice to display the Booklet
Mode Selection Screen to make another selection or to release the setting.
See p. 3-10 for details on setting print quantity.
See p. 3-4 to p. 3-9 for details on positioning originals.
When loading originals, heed the following limits on capacity:
Folding mode:
12 pages or less for simplex copying
6 pages or less for duplex copying
Stapling & Folding mode:
80/64 pages or less for simplex copying (20/28 lb paper)
40/32 pages or less for duplex copying (20/28 lb paper)
Exceeding the above capacity limits may cause trouble in the Finisher.
When the Trimmer unit tray capacity is exceeded, the Finisher and
Trimmer unit will cease operating. To avoid this, select the
appropriate print quantity from the specifications shown on p. 8-16.