Original Direction - Minolta CF5001 User Manual

Making Double-Sided Copies (1 2, 2 2) (continued)
Selecting UP BINDING will make copies upside down on the reverse side,
while RIGHT&LEFT BINDING copies normally.
Touch OK to return to the Basic Screen.
4.
Select additional copy conditions, as desired.
Some incompatible conditions may automatically release the selected copy
mode. In this case, arrange the settings so that they are compatible with the
selected copy mode.
5.
Enter the desired print quantity from the control panel keypad.
See p. 3-10 for details on setting print quantity.
6.
Position originals FACE UP in the document feeder according to the

original direction.

• See p. 3-4 to p. 3-7 for details on positioning originals.
• Use RADF store mode (p. 3-33 to p. 3-34) when the original count exceeds
7.
Press [START].
The machine starts to scan originals, then prints duplex copies when ready for output.
Press [STOP] to suspend the scanning or printing job. See p. 3-13 for details.
When the finisher / trimmer unit / paper exit tray capacity is exceeded
due to the print quantity selected, remove the copied sets as they
exit; otherwise, mishandled paper will occur.
100.
3
Copying
Operations
Selecting
Color Mode
Positioning
Originals
Setting Print
Quantity
Set Job During
Warmup
Stop
Scan/Print
Copy Size
Multi-Sheet
Bypass Tray
Lens Mode
1-2, 2-2
2-1
Store Mode
Reserve
Job Status
Screen
Output without
Finisher
FS-115/215
Output Modes
Binding
Mode
3-27