Minolta CF5001 User Manual page 16

Output for FN-120/FN-9 Finisher with Cover Inserter D Installed:
Cover Sheet mode
Off-Line Finishing mode
For details, see Section 8: Advanced Information.
Overlay
Scans an original image and overlays it on the pages of another document. For example,
you may want to incorporate a page heading, graphic design or logo into the pages of your
document.
Overlay Memory
Same as for Overlay except the overlay image is stored in memory.
Paper Capacity
Total 1,750 sheets, including three 500-sheet trays and a 250-sheet Multi-sheet bypass tray.
Total 4,250 sheets, including 2,500-sheet optional large capacity tray.
Platen Memory
Scans documents into memory from the platen glass and/or the document feeder and
inserts the pages into another document copied from the document feeder. If an
incompatible function is selected in this mode, the latter function will not be selected, and
an Error message will be displayed.
Power Saver
Automatically turns off all but nominal power supply after a specified period of copier
inactivity, for optimal efficiency. Power is returned after a brief warm up period by pressing
[POWER SAVER ON/OFF] on the control panel.
Program Job
Scans documents into memory while designating different copy conditions for each
original, then prints all the documents collectively.
Proof Copy
To ensure correct output before running multiple copies, run a proof copy by pressing
[PROOF COPY] on the control panel or touching PROOF COPY on the Check Screen.
Punch Mode for FN-120/FN-9 Finisher with PK-5 Punch Kit Installed:
Punches three holes in output copies.
Repeat
Selects the horizontal image area across the page, and repeats it down the page as many
times as the repeat width setting (10 ~ 150 mm) permits in manual or auto.
Reserve
Scans in subsequent copy jobs while the CF5001 is busy printing or copying.
Reverse Image
Reverses the positive image to negative image or vice versa in the selected color mode.
xii
Features of the CF5001 (continued)