Minolta CF5001 User Manual page 134

4-10
For particular jobs in progress, copying will cease only after certain phases of
the immediate operation are completed, as indicated by the [INTERRUPT] LED
conditions described below.
• Collectively printing image stored in memory
The LED blinks until one set of the current job is printed.
Then the LED remains steady for the temporary job performed in Interrupt
mode.
• Scanning originals into memory
The LED blinks until scanning is completed for all originals placed in the
document feeder.
Then, the LED remains steady for the temporary job performed in Interrupt
mode.
• Scanning originals into memory while printing in Reserve mode
The LED blinks until the copier completes the current printing job, scans all
originals placed on the document feeder, and prints one set of the Reserved
job.
The LED remains steady for the temporary job performed in Interrupt mode.
Interrupt Copying (continued)