To Specify Desired Copy Size (Ams) - Minolta CF5001 User Manual

To Specify Desired Copy Size (AMS)

When a copy size is specified on the touch screen, an appropriate reduction or
enlargement ratio will be selected automatically according to the original size detected
from the RADF or the platen glass.
1.
Touch a tray key on the Basic Screen to select the desired copy size.
Selected tray key will be highlighted, and under the LENS MODE the AMS key will also
be highlighted.
2.
Select additional copy conditions, as desired.
3.
Enter the desired print quantity from the control panel keypad.
4.
Position original(s).
5.
Press [START].
Scanned image will be printed on the specified copy size in the magnification ratio
automatically selected.
3-16
Wide paper size can be specified when AMS is in use.
In this case, the same magnification ratio as that of the standard size will be
selected automatically.
If copying in 1.000 (100%) magnification mode and specifying a copy size, see
p. 3-22.
See p. 3-10 for details on setting print quantity.
• See p. 12-9 to p. 12-11 for the original sizes detectable from the RADF or on
the platen glass.
• See p. 3-4 to p. 3-9 for details on positioning originals.
Selecting Copy Size (continued)