Recalling Previous Job Settings
Follow the procedure below to copy with a previous job's settings.
• Only the last-completed output job settings can be recalled as the previous
• The previous job settings can be recalled, even after the machine power is
1.
Press [JOB MEMORY] on the control panel.
The Job No. Selection Screen will be displayed.
2.
Touch PRE-JOB RECALL.
The JOB CHECK key will be displayed between STORE and PRE-JOB RECALL on the
screen.
3.
Touch JOB CHECK to display the Job Check Screen.
Check the settings of the previous output job.
4.
Touch OK to return to the Basic Screen.
The settings of the previous output job is recalled on the screen.
5.
Change the settings recalled on the screen, if desired.
6.
When all settings are acceptable, position original(s) in the document
feeder or on the platen glass, then press [START].
job settings. Non-complete job or reserve job settings cannot be recalled,
even if the setting operations have been made last.
turned off then on.
4
Helpful
Functions
Proof Copy
Check Mode
Interrupt
Mode
Job Memory
Recalling
Previous Settings
Help Mode
4-15