Communication
The Communication settings change the Ethernet address method from DHCP to STATIC. If set to
STATIC, enter the IP address, subnet mask, and gateway address manually to match the settings of
the network.
Description
1) EthAddressMethod
2) EthGatewayAddress
3) EthIpAddress
4) EthSubnetMask
EthAddressMethod—The method used to obtain the Ethernet network IP address. Select
DHCP or STATIC from the Current Value drop‐down list.
When the value is DHCP, the EthGatewayAddress, EthIpAddress, and EthSubnetMask
values are filled in automatically.
When the value is STATIC, the EthGatewayAddress, EthIPAddress, and EthSubnetMask
values must be set manually.
EthGatewayAddress—Enter the gateway address for the Ethernet network.
EthIpAddress—Enter the static IP address for the printer.
EthSubnetMask—Enter the subnet mask for the Ethernet network.
1.
Click Set Current to apply the changes.
2.
Log out of Printer Manager, and then restart it for the changes to take effect.
SD160/SD260 Card Printers Installation and Administrator's Guide
Default Value
DHCP
0.0.0.0
0.0.0.0
0.0.0.0
Current Value (unit)
DHCP
0.0.0.0
0.0.0.0
0.0.0.0
39