Frontpanel - DataCard SD260 Installation And Administrator's Manual

FrontPanel

Use the FrontPanel settings to customize the printer front panel.
Description
1) BacklightBrightness
2) KeySenseLevel
3) LcdConfigMenu
4) LedCardsPickedToCleaning
5) LedPrintheadCyclesToCleaning
6) LedRibbonLow
7) SpeakerEnabled
Change the front panel settings as needed, and then click Set Current to apply the changes.
BacklightBrightness—Set the LCD front panel backlight brightness at the desired level, from

0 percent (no backlight) to 100 percent (bright).
KeySenseLevel—Set the front panel key sensitivity to a comfortable level. Select from 0 (low

sensitivity, almost a press) to 10 (high sensitivity, barely a touch).
LcdConfigMenu—Enable or disable access to the Configuration menu on the LCD panel menu

system. (The Status and Maintenance menus cannot be disabled.)
LedCardsPickedToCleaning—Set the number of cards to pick between required cleaning. The

card light displays amber when the printer reaches this value. If this value is set to 0, cards
between cleaning are not tracked.
LedPrintheadCyclesToCleaning—Set the number of printhead cycles between required

cleaning. The card light displays amber when the printer reaches this value. If this value is set
to 0, cycles between cleaning are not tracked.
LedRibbonLow—Set the percentage of ribbon remaining before being notified that the

ribbon is low and should be changed. The ribbon light displays green when the ribbon
reaches this value.
SpeakerEnabled—Enable or disable the external printer speaker. The speaker provides a

sound in addition to the front panel lights and LCD text.
SD160/SD260 Card Printers Installation and Administrator's Guide
Default
Value Current Value (unit)
100 100 percent
4 6
Enabled Enabled
1500 1500
2500 2500
10 10 percent
Enabled Enabled
Allowed Range
[0 – 100]
None [0 – 10]
quantity [0 – 1000000]
quantity [0 – 1000000]
[0 – 100]
43