DataCard SD260 Installation And Administrator's Manual page 69

Using custom magnetic stripe data formats is a two‐step process. First, define the custom tracks
using MagStripeCustomTrack1, MagStripeCustomTrack2, and MagStripeCustomTrack3. Second,
apply the custom track using the settings on the MagStripeGeneral menu.
1.
To use the defined custom track:
a.
Open the MagStripeGeneral menu.
b.
Select Custom for DataFormat1, DataFormat2, or DataFormat3 to use the custom track.
MagStripeCustomTrack1 corresponds to DataFormat1

MagStripeCustomTrack2 corresponds to DataFormat2

MagStripeCustomTrack3 corresponds to DataFormat3

2.
Click Set Current to apply the changes.
SD160/SD260 Card Printers Installation and Administrator's Guide 55