5.
Use the rotary knob to set
the required duration.
6.
Press the OK button. The
duration counts down in the
display.
The program has ended
Cancelling the program
Notes
Automatic adjustment
32
Sabbath program
Top/bottom heat.
Duration:
Function complete" appears in the display. Switch off
the function selector to display the time again.
Switch off the function selector.
The buttons are locked once the program has started.
It is not possible to call up or modify settings.
The oven light is lit while the program is running. It
cannot be switched off. In the event that the oven light
does not light up, press the function selector before
the program begins.
If you select a dish from the automatic adjustment
program, the optimum adjustment values are already
specified.
You reach the dishes via two or three selection levels.
Give it a try. Look at the variety of dishes. If you wish
to quit the automatic adjustment program, simply
switch off the function selector.