3
Press the [Done] key.
Repeat until the Additional Functions screen closes.
Setting the Sender Date/Time Format (TX Terminal ID Time
Format)
NOTE
• The factory setting is MM/DD/YYYY.
1
Call up the desired screen as follows:
Additional
key → [Communications Settings] → [Fax Settings] → [
Functions
[TX Terminal ID Time Format]
2
Select a Date/Time format, then press the
[OK] key.
MM/DD/YYYY: Month/Date/Year
DD/MM YYYY: Date/Month/Year
YYYY MM/DD: Year/Month/Date
3
Press the [Done] key.
Repeat until the Additional Functions screen closes.
4-32
Communications Settings
] →
] or [