Pptp; L2Tp; The Passthrough Screen - Hitron CGNV2 User Manual

HITRON CGNV2 USER'S GUIDE
8.1.2

PPTP

The Point-to-Point Tunneling Protocol (PPTP) is used for providing security levels
and remote access levels comparable with typical VPN products.
8.1.3

L2TP

The Layer 2 Tunneling Protocol (L2TP) is a tunneling protocol used to support virtual
private networks (VPNs) or as part of the delivery of services by ISPs.
8.2

THE PASSTHROUGH SCREEN

Use this screen to select the VPN pass-through mode.
Click VPN > PassThrough. The following screen displays.
NOTE: This screen allows to choose which VPN protocols will be supported by
CGNV2 in passthrough mode when the VPN client is a CPE connected to its
LAN.
FIGURE 35: The VPN > PassThrough Screen
The following table describes the labels in this screen.
TABLE 33: The VPN > PassThrough Screen
PassThrough Mode
IPsec PassThrough Use this field to select whether the IPsec Pass-through be
active or not.

Select Enabled to activate the IPsec Pass-through.

Deselect Enabled to deactivate the IPsec Pass-
through.
99
VPN