Adding Or Editing A Port Triggering Rule; Figure 22: The Firewall > Port Triggering > Add/Edit Screen - Hitron CGNV2 User Manual

64
TABLE 21:
Enable
Add New
Edit
Delete
Apply
Cancel
Help
4.6.1

To add a new port triggering rule, click Add in the Firewall > Port Triggering
screen.

To edit an existing port triggering rule, select the rule's radio button (
Firewall > Port Triggering screen and click the Edit button.
The following screen displays.
FIGURE 22:
FIREWALL
The Firewall > Port Triggering Screen
Use this field to turn each port triggering rule on or off.


Click this to define a new port triggering rule. See

Adding or Editing a Port Triggering Rule

information on the screen that displays.
Select a port triggering rule's radio button (
this to make changes to the rule. See
a Port Triggering Rule
screen that displays.
Select a port triggering rule's radio button (
this to remove the rule. The deleted rule's information
cannot be retrieved.
Click this to save your changes to the fields in this
screen.
Click this to return the fields in this screen to their last-
saved values without saving your changes.
Click this to see information about the fields in this
screen.
ADDING OR EDITING A PORT TRIGGERING RULE
The Firewall > Port Triggering > Add/Edit Screen
Select this checkbox to enable the port triggering
rule.
Deselect this checkbox to disable the port triggering
rule.
on page
HITRON CGNV2 USER'S GUIDE
on page
) and click
Adding or Editing
64 for information on the
) and click
64 for
) in the