18
TABLE 1:
LAN1
LAN2
LINE
CABLE
POWER
1.3
LEDS
This section describes the CGNV2's LEDs (lights).
INTRODUCTION
Hardware Connections
Use these ports to connect your computers and other
network devices, using Category 5 or 6 Ethernet cables
with RJ45 connectors.
Use this port to connect your analog phones for VoIP
services, using cables with RJ11 connector.
Use this to connect to the Internet via an F-type RF
cable.
Use this to connect to the 12v/2A power adapter that
came with your CGNV2.
HITRON CGNV2 USER'S GUIDE
NEVER use another power adapter with
your CGNV2. Doing so could harm your
CGNV2.