Figure 28: Wps Pin - Hitron CGNV2 User Manual

82
TABLE 26:
Run WPS
WPS Current Status
SSID Setting
SSID Name
Hidden
WIRELESS
The Wireless > Basic Screen (continued)
Use these buttons to run Wifi Protected Setup (WPS):

Click the PBC button to begin the Push-Button
Configuration process. You must then press the PBC
button on your client wireless devices within two
minutes in order to register them on your wireless
network.

Click the PIN button to begin the PIN configuration
process. In the screen that displays, enter the WPS
PIN that you want to use for the CGNV2, or the WPS
PIN of the client device you want to add to the
network.
FIGURE 28:
This displays whether the WPS function is active, idle or
not used.
This displays Primary SSID.
NOTE:
Enter the name that you want to use for your wireless
network. This is the name that identifies your network,
and to which wireless clients connect.
NOTE:
Use this field to make your network visible or invisible to
other wireless devices.

Select the checkbox if you do not want the CGNV2 to
broadcast the network name (SSID) to all wireless
devices in the coverage area. Anyone who wants to
connect to the network must know the SSID.

Deselect the checkbox if you want your network
name (SSID) to be public. Anyone with a wireless
device in the coverage area can discover the SSID,
and attempt to connect to the network.
HITRON CGNV2 USER'S GUIDE
WPS PIN
You may have additional BSSIDs, depending on
your contract with your service provider.
It is suggested that you change the SSID from its
default, for security reasons.