The Password Screen; Figure 9: The Cable > Password Screen - Hitron CGNV2 User Manual

36
TABLE 8:
Modulation
Signal Strength (dBuV) This displays the transmitted power of the signal of each
Channel ID
Cable Modem IP Information
IP Address
Subnet Mask
Gateway IP
DHCP Lease Time
2.5

THE PASSWORD SCREEN

Use this screen to change the password with which you log in to the CGNV2.
NOTE: If you forget your password, you will need to reset the CGNV2 to its factory
defaults.
Click Cable > Password. The following screen displays.
FIGURE 9:
CABLE
The Cable > Status Screen (continued)
This displays the type of modulation that each
downstream channel uses. Possible modulation types
upstream data channel to which the CGNV2 is
connected, in dBuV .
This displays the ID number of each channel on which
the upstream signal is transmitted.
This displays the CGNV2's WAN IP address. This IP
address is automatically assigned to the CGNV2
This displays the CGNV2's WAN subnet mask.
This displays the gateway IP address of the device on
the WAN to which the CGNV2 is connected.
This displays the time that elapses before your device's
IP address lease expires, and a new IP address is
assigned to it by the DHCP server.
The Cable > Password Screen
HITRON CGNV2 USER'S GUIDE