The Pptp Screen - Hitron CGNV2 User Manual

HITRON CGNV2 USER'S GUIDE
TABLE 35: The VPN > IPsec > Add/Edit Screen (continued)
ESP AUTH
AH
Tunnel Type
IPsec Life Duration
Tunnel Remote Host Configuration
IP type
IP Address
Subnet Mask
Back
Apply
Cancel
8.4

THE PPTP SCREEN

Use this screen to configure PPTP function. You can turn PPTP function on or off and
configure the settings.
Click VPN > PPTP. The following screen displays.
Use this field to select the type of ESP Authentication you
want to use. See Cryptographic Hash Function
for information on the screen that displays.

MD5

SHA

SHA2_256
NOTE: The options that display depend on the IPsec
Operation you selected.
Use this field to select the type of AH Authentication you
want to use. See Cryptographic Hash Function
for information on the screen that displays.

MD5

SHA

SHA2_256
NOTE: The options that display depend on the IPsec
Operation you selected.
Use this field to select whether the type of the tunnel is
public or private.
Use this field to enter the IPsec Life Duration value in
seconds.
This displays the nature of the IP.
NOTE: Leave this field at its default.
Use this field to enter the allowed IP address for the
tunnel's connection.
Use this field to enter the tunnel's subnet mask.
Click this to return the fields in this screen to their last-
saved values without saving your changes.
Click this to save your changes to the fields in this screen.
Click this to return the fields in this screen to their last-
saved values without saving your changes.
10
on page 98
on page 98
VPN