The Ip Filtering Screen - Hitron CGNV2 User Manual

HITRON CGNV2 USER'S GUIDE
TABLE 16: The Firewall > MAC Filtering Screen (continued)
Device Name
MAC Address
Type
Manually-Added LAN Devices
Device Name
MAC Address
Type
Add
Cancel
Apply
Cancel
Help
4.4

THE IP FILTERING SCREEN

Use this screen to configure IP filtering. You can turn IP filtering on or off and
configure new and existing IP filtering rules.
Click Firewall > IP Filtering. The following screen displays.
This displays the name of each network device that has
connected to the CGNV2 on the LAN.
This displays the MAC address of each network device
that has connected to the CGNV2 on the LAN.
Use this field to specify the list to which you want to add
the device.

Select Allow to add the device to the Allow Table.

Select Deny to add the device to the Deny Table.
Enter the name to associate with a network device that
you want to permit or deny access to the CGNV2 and the
network.
NOTE: This name is arbitrary, and does not affect
functionality in any way.
Specify the MAC address of the network device that you
want to permit or deny access to the CGNV2 and the
network.
Use this field to specify the list to which you want to add
the device.

Select Allow to add the device to the Allow Table.

Select Deny to add the device to the Deny Table.
Click this to add the device to the list you specified.
Click this to clear the Manually-Added LAN Devices
fields.
Click this to save your changes to the fields in this screen.
Click this to return the fields in this screen to their last-
saved values without saving your changes.
Click this to see information about the fields in this screen.
55
FIREWALL