Adding Or Editing A Vpn Tunnel - Hitron CGNV2 User Manual

10
TABLE 34:
Remote Gateway IP
Status
Uptime & Count
Active Type
Add
Edit
Delete
VPN Log
Clear
Refresh Logs
8.3.1

To add a new VPN tunnel, click Add in the VPN > IP Sec screen.

To edit an existing VPN tunnel, select the tunnel's radio button in the VPN > IP
Sec screen and click the Edit button.
NOTE: Ensure that Enabled is selected in the VPN > IP Sec screen in order to add or
edit VPN tunnel.
The following screen displays.
VPN
The VPN > IPsec Screen (continued)
This displays the IP address of the remote gateway on
WAN.
This displays whether the tunnel is connected.
This displays the time period and number of times during
the tunnel connected.
This displays the active type of the VPN tunnel.
Click this to define a new VPN tunnel. IPsec VPN
Functions must first be set to Enabled. See
Editing a VPN Tunnel
screen that displays.
Select a VPN tunnel's radio button and click this to make
changes to the tunnel. IPsec VPN Functions must first be
set to Enabled. See
page
Select a VPN tunnel's radio button and click this to remove
the tunnel. The deleted rule's information cannot be
retrieved.
Use this field to remove the VPN logs.
Use this field to obtain the VPN logs again.

ADDING OR EDITING A VPN TUNNEL

HITRON CGNV2 USER'S GUIDE
on page
Adding or Editing a VPN Tunnel
102 for information on the screen that displays.
Adding or
102 for information on the
on