Login To The Cgnv2; Gui Overview; Figure 4: Login - Hitron CGNV2 User Manual

22
1.5

LOGIN TO THE CGNV2

Take the following steps to login to the CGNV2's GUI.
NOTE: You can login to the CGNV2's GUI via the wireless interface. However, it is
strongly recommended that you configure the CGNV2 via a wired connection
on the LAN.
1
Open a browser window.
2
Enter the CGNV2's IP address (default 192.168.0.1) in the URL bar. The Login
screen displays.
FIGURE 4:
3
Enter the Username and Password. The default login username is cusadmin,
and the default password is password.
NOTE: The Username and Password are case-sensitive; "cusadmin" is not the same
as "Cusadmin".
4
Click Login. The System Info screen displays (see
page 30).
1.6

GUI OVERVIEW

This section describes the CGNV2's GUI.
INTRODUCTION
Login
HITRON CGNV2 USER'S GUIDE
The System Info Screen on