Hitron CGNV2 User Manual page 54

54
The following table describes the labels in this screen.
TABLE 16:
MAC Filter Options
MAC Filter Options
Allow Table (up to 16 Items)
Select
#
Device Name
MAC Address
Delete
Deny Table (up to 16 Items)
Select
#
Device Name
MAC Address
Delete
Auto-Learned LAN Devices
Select
FIREWALL
The Firewall > MAC Filtering Screen
Use this field to control whether the CGNV2 performs
MAC filtering.

Select Allow-All to turn MAC filtering off. All devices
may access the CGNV2 and the network.

Select Allow to permit only devices with the MAC
addresses you set up in the Allow Table to access the
CGNV2 and the network. All other devices are denied
access.

Select Deny to permit all devices except those with the
MAC addresses you set up in the Deny Table to
access the CGNV2 and the network. The specified
devices are denied access.
Select a MAC address's radio button before clicking
Delete.
This displays the index number assigned to the permitted
device.
This displays the name you gave to the permitted device.
This displays the MAC address of the permitted device.
Select a permitted device's radio button (
to remove the device from the list. The device may no
longer access the CGNV2 and the network.
NOTE: Make sure you do not delete your management
computer from the list; if you do so, you will need
to log back in from another computer, or reset the
CGNV2.
Select a MAC address's radio button before clicking
Delete.
This displays the index number assigned to the permitted
device.
This displays the name you gave to the denied device.
This displays the MAC address of the denied device.
Select a denied device's radio button (
remove the device from the list. The device may now
access the CGNV2 and the network.
Select a MAC address's radio button before clicking Add
or Cancel.
HITRON CGNV2 USER'S GUIDE
) and click this
) and click this to