The Debug Screen; Figure 12: The Wan/Lan > Debug Screen - Hitron CGNV2 User Manual

44
The following table describes the labels in this screen.
TABLE 11:
Reserved IP
MAC Address
Static IP Address
Comment
Back
Apply
Cancel
3.3

THE DEBUG SCREEN

Use this screen to perform ping and traceroute tests on IP addresses or URLs.
Click WAN/LAN > Debug. The following screen displays.
FIGURE 12:
The following table describes the labels in this screen.
TABLE 12:
IP/URL
Method
Run
Help
WAN/LAN
The WAN/LAN > LAN IP > Add/Edit Screen
Use this field to enter the Media Access Control (MAC)
address of the network device.
Use this field to enter the static IP address.
Use this field to enter your comment.
Click this to return to the previous screen without saving
changes.
Click this to save your changes to the fields in this
screen.
Click this to return the fields in this screen to their last-
saved values without saving your changes.
The WAN/LAN > Debug Screen
The WAN/LAN > Debug Screen
Enter the IP address or URL that you want to test.
Select the type of test that you want to run on the IP/
URL that you specified.
Click this to perform the test.
Click this to see information about the fields in this
screen.
HITRON CGNV2 USER'S GUIDE