Resetting The Cgnv2; Figure 5: Gui Overview; Table 3: Gui Overview - Hitron CGNV2 User Manual

HITRON CGNV2 USER'S GUIDE
FIGURE 5: GUI Overview
TABLE 3: GUI Overview
Primary Use this section to move from one part of the GUI to another.
Navigation Bar
Secondary Use this section to move from one related screen to another.
Navigation Bar
Main Window Use this section to read information about your CGNV2's
configuration, and make configuration changes.
1.7

RESETTING THE CGNV2

When you reset the CGNV2 to its factory defaults, all user-configured settings are
lost, and the CGNV2 is returned to its initial configuration state.
There are two ways to reset the CGNV2:

Press the RESET button on the CGNV2, and hold it in for ten seconds or longer.

Click WAN/LAN > Backup. In the screen that displays, click the Factory Reset
button.
INTRODUCTION
23